Limerick’s Most Trusted Boiler Experts

Water Heater Installation & Emergency Repair in Limerick

In Ireland, a water heater is usually a hot water cylinder or immersion heater. We install, repair, and replace every type across Limerick city and county. No hot water? Call (061) 518 247 for same-day help.

RGII Registered

for Gas Work

IS813 Certified

Serving Limerick

City & County

Trusted Water Heater Installation in Limerick

  • RGII registered for gas installations, full safety documentation on every job
  • Fixed pricing agreed before any work starts
  • Most installations completed in a single visit
  • Covers Dooradoyle, Castletroy, Raheen, Adare, Annacotty, Castleconnell, and Bunratty
  • Same-day reach near Crescent Shopping Centre, University of Limerick, Thomond Park, and Childers Road
  • A cold Monday shower or a house full of guests with no hot water — we treat both as genuinely urgent

Water Heater Installation

Need Help Now?

Call Now:

Same-Day Service across the Limerick City

What Happens When You Call

You describe the problem

You describe the problem or what system you want installed

Ask a few questions

We ask a few quick questions to gauge your household’s hot water demand

Free site visit arranged

Free site visit arranged at a time that suits you

Honest inspection & read

We inspect the setup and give an honest read, including the cheapest fix if that’s genuinely the right call

Written fixed-price quote

Written fixed-price quote before anything’s agreed

We complete the test and leave

We complete the work, test it properly, and only leave once it’s performing as it should

What’s Included in a Full Water Heater Installation

  • Removal of the old cylinder or tank
  • Fitting the new unit
  • All pipework and valve connections
  • Pressure testing
  • Thermostat setup
  • Full safety check on every job — gas units certified to IS813 by RGII registered engineers, electric systems fitted to current wiring regulations
  • Written compliance documentation on completion, including a Declaration of Conformance for gas installs
  • Every installation is tested for safety, performance, and correct operation before we leave your property.

Immersion heater replacement typically runs €350–€700. A full cylinder installation runs €1,400–€2,400 depending on size, system type, and existing pipework. Most jobs take three to six hours — older properties with dated pipework can run longer, and we’ll flag that before starting, not after.

First Call Plumbing engineer installing Joule hot water cylinder Limerick

Types of Water Heaters We Install

Immersion elements fail faster than they should in hard water areas like Annacotty and Bunratty — mineral buildup eats away at the element from day one. We advise on the right protection upfront rather than let you find out three years in.

Vented cylinders

Vented cylinders

most common in older Irish homes, fed from a header tank

Unvented cylinders

Unvented cylinders

mains pressure, stronger flow to showers and baths

Electric storage cylinders

Electric storage cylinders

good fit for apartments without a direct gas supply

Immersion heaters

Immersion heaters

electric element replacement in existing tanks, from €350

Gas-fired hot water cylinders

Gas-fired hot water cylinders

fast recovery, suits high-demand family homes in Raheen and Castletroy

Water Heater Brands We Install & Repair

Joule

strong Irish market presence, good parts availability

Kingspan

reliable unvented range, common in newer builds

Telford

solid mid-range option, widely fitted in Munster homes

Heatrae Sadia

well known for unvented cylinders, good warranty terms

Ariston

dependable electric and gas storage units

Grant

trusted for hot water cylinders paired with oil or gas systems

Typical Starting Prices in Limerick

System Type

Starting From

Typical Time / Note

€350

€1,200

€1,600

€80

€2,400+

Fixed-price quote confirmed before any work begins. No hidden callout fees. Prices are estimates and may vary depending on the property, system type, and installation requirements.

Repair, Replace, or Just a Warning Sign?

Most failures don’t happen overnight — they show up as a warning sign first, and catching it early usually means a repair instead of a full replacement.

Joule hot water cylinder installation with copper pipework

RGIINo hot water or it runs cold quicklyRegistered

usually a failed thermostat or burnt immersion element, or a pilot light fault on gas units, most repairable without full replacement

Leaking tank or cylinder

in older Raheen and Dooradoyle homes, usually tank seam corrosion after 10–15 years, and once the seam goes, replacement is the only safe route

Strange tank noises

rumbling or banging from sediment and limescale, common in hard water pockets around Annacotty and Bunratty, usually fixed with a descale or element swap

Rusty or dirty water

internal corrosion or a failed anode rod, once the lining goes, replacement is the only safe route

Low hot water pressure

hot tap only affected, usually a blocked dip tube, partly closed valve, or scale inside a vented cylinder

Beyond individual symptoms, replacement usually makes more sense than another repair when the system is over 12–15 years old, when you’ve had multiple repairs already this year, or when the repair quote is close to a third of a new unit’s price. We’ll tell you honestly which side you’re on, even when it costs us the repair job.

Our Installation Process

Free site survey

we assess water pressure, pipework, tank location, gas or electrical supply, and ventilation, sized to your actual household, not a one-size-fits-all default

Safe removal and full fit

often a €old unit removed, new cylinder fitted, pipework and connections completed, pressure relief valve and expansion vessel fitted, thermostat set upelectrode, not a dying boiler

Commissioning and system testing

flow, pressure, temperature accuracy, valve operation, leak points, and recovery time all tested before we leave

Handover

we walk you through the thermostat settings, the pressure relief valve location, and what to check yourself between services

Gas work is completed to RGII standards and IS813. Electric installations meet current Irish wiring regulations. You get written compliance documentation for the finished job — essential for rental compliance and home insurance.

Water Heater Repair in Limerick — Same-Day Response

No hot water on a school morning, or a system that’s given up with a house full of visitors — we treat these as genuinely urgent. Same-day response across the city and county.

No hot water at all

often a failed thermostat or burnt immersion element

Water too hot or scalding

usually a thermostat stuck on or set too high

Water too cold or lukewarm

heating element failing or a wiring fault

Leaking cylinder

a failed seal, corroded seam, or cracked fitting

Faulty thermostat

replacement costs €100–€300, restores hot water without touching the cylinder itself

Failed immersion element

the most common call we get, straightforward swap in most cases

Pressure relief valve leaking

usually an overheating system or a worn valve seat

Tank leaks and pipe joint failures are traced using non-invasive detection equipment — catching it early avoids structural damage and a costlier replacement later.
Covering Dooradoyle, Castletroy, Raheen, Annacotty, Corbally, Mungret, Caherdavin, and Ballysimon. Call (061) 518 247 for immediate response.

Water Heater Maintenance

A system that’s never serviced fails earlier than one that’s checked annually.

Check the T&P (temperature and pressure) relief valve yearly for correct operation

Flush sediment from the base of the tank to stop it insulating the element and forcing it to overwork

Inspect the immersion element for scale buildup, especially in hard water areas

Check the thermostat is holding an accurate temperature, not drifting

Book an annual inspection so small faults get caught before they become a no-hot-water call

Water Heater Maintenance

What Limerick Customers Say

Frequently Asked Questions

Immersion heater replacement typically runs €350 to €700. A full cylinder installation runs €1,200 to €2,400 depending on vented or unvented type and existing pipework. Gas installs include a Declaration of Conformance, with a fixed-price quote before any work begins.

Yes, RGII registered, IS813 What’s globally called a “water heater” is a hot water cylinder or immersion heater here. Most Irish homes run a vented or unvented cylinder heated by gas, oil, or electric immersion element..

No. Irish building regulations and gas safety law require certified professionals for gas connections, mains-pressure unvented systems, or high-voltage electrical work. Uncertified gas work is a prosecutable offence, voids your home insurance, and invalidates equipment warranties.

Most jobs take three to six hours. Older homes with corroded pipework or outdated valves can take longer — we assess on arrival and give a clear timeframe before starting.

In most cases it’s repairable, especially thermostat, element, or valve faults. Replacement usually makes more sense once the tank itself is leaking, over 12–15 years old, or has needed several repairs already. We’ll give you a straight answer either way.

Yes, same-day across the city and county — Dooradoyle, Castletroy, Raheen, Annacotty, Corbally, Mungret, Caherdavin, and Ballysimon. Call (061) 518 247.

Water Heater Installation in Limerick — Done Right

Water Heater Installation in Limerick — Done Right

We know the older estates with the original tanks, and which parts of the city fight hard water the hardest. New install, emergency repair, or a straight answer on whether your current system is worth saving — call (061) 518 247.

RGII Registered

for Gas Work

IS813

Certified

First Call Plumbing & Heating